Take the next step in the EVO-lution of additive manufacturing with us.
Closed loop DRIVE SYSTEM
Hohe Systemstabilität
Automatische Korrektur von Abweichungen
TEMPERATURE CONTROLLED
Weniger Verzug und Spannungen
Bessere Layerhaftung und Verschweißung
Bessere Druckbetthaftung
AUTOMATIC CALIBRATION
Automatic 36 point bed levelling
Automatic calibration of parallelism between bed and nozzles
Automatic calibration of the nozzles to each other
2 independent nozzles
Copymodus verdoppelt den Output
Verbesserter Dualdruck
Integrierte Düsenreinigungsstation
Parkposition außerhalb des Druckbereichs
Filament drying
Hohe Reproduzierbarkeit
Hohe Prozessstabilität
Höhere Bauteilfestigkeit
Definierte Rohmaterialfeuchtigkeit
prereq AUTOMATIC FILAMENT DETECTION
Restmaterialanzeige
Abgleich des Materials zwischen G-Code und Spule
Chargenverfolgung
Dokumentation
Made in Austria
Kauf direkt beim Hersteller
Schnelles Service in Ihrer Nähe
Know How Transfer durch EVO-tech Academy
INTERFACES
Touchdisplay
LAN/WLAN/USB
API zur Integration ins eigene Produktionsnetzwerk
Wide variety of filaments + OPEN SYSTEM
15 Materialien direkt vom Hersteller
Komplett offene Maschine und freie Programmierung
Offen für Materialien von Drittanbietern
EVO-lizer Price Comparision
EL-28 Basic
12.430€
Net- Build tray: 340x 240 x 350 mm
- Print volume: 28 Liter
- Print bed temperature: max 100°C
- Nozzle temperature: max 290°C
- -
- Auto bed levelling
- -
- Filament-Run-Out-Sensor
- -
- -
- Filament spool size: 1KG
- Soluble support material
- Two independent nozzles
- Nozzle cleaning station
- Copymode
- -
- -
- -
- Magnetisches Spannsystem
- Peak power consumption: 1.300 Watt
- Average power consumption: 600 Watt
- Electrical connection: 230 Volt
- Gewicht: ca. 150 KG
EL-28 Advanced
17.860€
Net
- Build tray: 340 x 240 x 350 mm
- Print volume: 28 Liter
- Print bed temperature: max 150°C
- Nozzle temperature: max 360°C
- Heating of chamber: 60°C
- Auto bed levelling
- Closed Loop axis system
- Filament-Run-Out-Sensor
- Material identification
- Filament drying
- Filament spool size: 1KG
- Soluble support material
- Two independent nozzles
- Nozzle cleaning station
- Copymode
- Webcam
- -
- -
- Magnetisches Spannsystem
- Peak power consumption: 2.700 Watt
-
Average power consumption: 900 Watt
- Electrical connection: 230 Volt
- Weight: ca. 170 KG
EL-102 V2
53.970€
Net
- Build tray: 500 x 400 x 510 mm
- Print volume: 102 Liter
- Print bed temperature: max 200°C
- Nozzle temperature: max 420°C
- HEating of chamber: 100°C
- Auto bed levelling
- Closed Loop axis system
- Filament-Run-Out-Sensor
- Material identification
- Filament drying
- Filament spool size: 1 bis 10KG
- Soluble support material
- Two independent nozzles
- Nozzle cleaning station
- Copymode
- Webcam
- Water cooling
- Vakuumspanntisch optional
- Magnetisches Spannsystem
- Peak power consumption: 4.500 Watt
-
Average power consumption: 1.300 Watt
- Electrical connection: 400 Volt
- Weight: ca. 500 KG
EL-102 Abmessungen
Open material system and large choice of industrial filaments
Unlike conventional 3D printing models, you do not bind EVO-lizer 3D printers from EVO-tech to specific manufacturers of engineering plastics. With more than 11 filaments developed in-house, EVO-tech offers you a large selection of plastics that have been specially optimized for our EVO-lizer industry 3D printers. Some of our materials are also available on 10 kg filament rolls to reduce waste and makeready times.
- flame retardant
- UV and temperature resistant up to over 200 ° C
- electrostatically dissipative
- food-safe
- abrasion and chemical resistant
About EVO-tech
EVO-tech based in Schörfling at the Attersee is a developer and manufacturer of 3D printers for industrial applications.
Based on years of experience, EVO-tech positions itself as a complete supplier of additive manufacturing.
Take the next EVO lution step in additive manufacturing with us.