The EL-11 3D-Printer.
The future of 3D printing. It starts again with the EL series.

Since its roll-out, the EL-11, which is 100% made in Austria, has established many new standards in professional 3D printing. Its sophisticated design, extremely low operating costs, open material system and many other properties make it the perfect entry-level device for industrial and commercial applications in professional 3D printing.

Get an offer now

Advantages of the EL-11 3D-Printer 

Closed, heated interior

Particular attention was paid to the active filtering of the exhaust gases with the help of activated carbon filters. The automatic temperature control of the installation space enables optimal component quality.

  • Built-in activated carbon filter
  • Low noise (max 49 dB)
  • Suitable for the office
  • Installation space volume 11.3 liters


Linear axes with ball screws for maximum accuracy.

Smartphone access

Access the printing process anytime and anywhere - with your own smartphone!

Webcam inside

The EVO-lizer is optionally equipped with a webcam. This enables the printing progress to be observed from any location, including time-lapse recordings.

12 engineering plastics

Already 12 engineering plastics developed in-house make the EVO-lizer an all-rounder - of course, materials from other manufacturers can also be used.

  • Flame retardant
  • UV-resistant
  • Resistant to temperatures above 200 degrees
  • Electrostatically dissipative
  • Suitable for food
  • Abrasion resistant
  • Resistant to chemicals

Made in Austria

The EVO-lizer is the only 3D printer in its class to be 100% made in Austria.

  • Purchase directly from the manufacturer
  • Know-how transfer through EVO-tech Academy
  • Fast and direct service in your area

High temperature nozzle

On request, the EVO-lizer can be equipped with high-temperature nozzles up to 330 ° C.

Low production costs

  • Up to 5x cheaper consumables
  • Maintenance-free guides
  • Wear parts easily exchangeable


Always state of the art with the EVO-lizer:

  • WLAN-, LAN- Interface
  • USB Interface
  • Controllable via web browser

Open material system and large variety of filaments

Unlike conventional 3D printing models, the EVO-lizer is not bound to certain manufacturers of engineering plastics. With 12 filaments developed in-house, EVO-tech offers you a large selection of plastics that have been specially optimized for the EVO-lizer industrial 3D printer.

  • Flame retardant
  • Resistant to temperatures above 200 degrees and against UV
  • Electrostatically dissipative
  • Suitable for food
  • Resistant against chemicals and abrasion
More information

Touch & Play

The cockpit of the EVO-lizer forms a high-resolution touch display. From this screen you can manage print jobs, make settings and keep an overview of the entire print history with all information. The technical data:

  • 800 x 480 Touch display
  • 70 ° field of view
  • 125 ppi dot density
Odoo • Text and Image

When is the EL-11 the right choice for you?

  • You need components up to a size of 270 x 200 x 210 mm (W x D x H)
  • You want to get into professional 3D printing (industry)
  • They process relatively small amounts of material
  • They do not process materials that absorb water very quickly and do not require integrated material drying
  • You process many different materials and want full control over the production parameters.

If these points apply to you, then the EL-11 is the right choice for you. If not, you may also be interested in our 3D printer EL-102.

To EL-102 3D Printer Get an offer now

Technical spezification

Print size (W x D x H)
270 x 200 x 205 mm
Installation space (volume)
11,3 liters
Housing size (W x D x H)
860 x 840 540 mm
Weight approx. 60kg
Volume approx. 49 dB
Positional accuracy
0,03 mm
Layer thickness
0,10 – 0,75 mm
Nozzle diameter
0,2 – 0,8 mm
Number of extruders
Printing board temperature
up to100° Celsius
Installation space temperature
up to 60° Celsius
Nozzle temperature
up to 270° Celsius, or up to 330° Celsius high temperature option
Housing ventilation
Deduction through activated carbon filter
Minimum wall thickness
0,3 mm
Electrical connection
230 V
Power consumption
approx. 250 W
Supported Operating Systems
Windows, Android, Linux, Apple OS, Apple iOS
Internal data storage
16 GB
Display 7 Zoll touch display, 800 x 480 display, 70° field of view, 125 ppi
Interfaces WLan, LAN, USB
Odoo • Text and Image

About EVO-tech

EVO-tech from Schörfling am Attersee is a developer and manufacturer of 3D printers for industrial applications.

Based on years of experience, EVO-tech positions itself as a full-service provider in additive manufacturing.

Get an offer now

Take the next EVO lution step in additive manufacturing with us.